GoldMine has a large number of settings that are controlled via INI files. Many are controlled inside the GoldMine interface but there are also many that are not. Some of these settings where introduced for backwards compatability switches.
Section 1 is the GM.INI file settings and section 2 is the USERNAME.INI file settings - these are per user in GoldMine.
I have also listed other INI settings I have found.
[AutoMaintain] |
FileList= |
File flags |
Set in Tools/Maintain/AutoMaint menu |
[AutoMaintain] |
LastRun= |
Days between runs |
Set in Tools/Maintain/AutoMaint menu |
[AutoMaintain] |
Options= |
File options (index only or pack) |
Set in Tools/Maintain/AutoMaint menu |
[AutoMaintain] |
StartTime= |
HH:MM |
Set in Tools/Maintain/AutoMaint menu |
[AutoMaintain] |
User= |
User name |
Set in Tools/Maintain/AutoMaint menu |
[GoldMine] |
AllowDupAddresses= |
0/1 |
(Don't)Accept duplicate e-mail addresses. See 1202 notes. |
[GoldMine] |
AllowDupEmails= |
0/1 |
(Don't)Accept duplicate e-mail addresses. GoldMine 4.00.822 and prior allowed duplicate E-mail address but that has changed for 4.00.1202 and greater. Duplicate addresses are no longer supported by default. See Kbase. |
[GoldMine] |
APProcess= |
0/1 |
?? 1->Automated process activated. |
[GoldMine] |
AutoLog= |
0/1/2 |
1->Automatically by-passes the login screen and goes directly into GoldMine. User= must also be specified in the GM.INI The user specified cannot have a password or GoldMine will not automatically login.
2->Performs the same function as above but GoldMine is minimized. |
[GoldMine] |
BDEConfigCheck= |
0/1(Default is 1) |
Prevents/enablesGM from automatically correcting BDE entries. See Factsback #500. |
[GoldMine] |
CommitRefreshSec= |
##(default=60 for builds 822 and earlier) |
Beginning with build 4.0.1202, updates to dBASE tables are now committed to the database as soon as they are made. To gain some performance on write-intensive applications, updates can be cached. See 1202 notes. |
[GoldMine] |
CommonDir= |
Path toCommon data files. |
Specifies the location of the contact files directory on a network installation when the exe's and dll's are being run from a local machine. The trailing backslash must be added. Usually X:\GoldMine\Common\. |
[GoldMine] |
Exclusive= |
0/1(default =0) |
1 ->instructs GoldMine to open all files in non-sharable mode. Setting this option to 1 is not generally recommended. To open files normally, set equal to 0, which is the default. |
[GoldMine] |
Golddir= |
Path to GMdata files. |
Locationof GoldMine files such as Cal.dbf. Usually X:\GoldMine\ orX:\GoldMine\GMBase\. |
[GoldMine] |
MasterClockMachine= |
\\servername |
Synchronizeworkstations-clocks to this server's clock every five minutes if UpdateLocalClock=1. Use the time of the master clock for all synchronization time stamps if UpdateLocalClock=0. |
[GoldMine] |
NameInTitle= |
0/1 |
(Don't)Allow placing the Organization value from the registration in the contact screen title bar. |
[GoldMine] |
NetIDAPI32DLL= |
Path to IDAPI32.DLL |
Sets path to this BDE file. |
[GoldMine] |
NetUpdate= |
0/1 |
? |
[GoldMine] |
NewComplete= |
0/1 |
ForceGoldMine to create all new records as complete records. GoldMine 4.0 bydefault won't make a complete record until data is inputted into contact2.NOTE: GoldMine 4.00.822 and greater automatically generates Contact2 Records during synchronization when a contact1 record is added to eliminated potential multiple contact2 RecID values for a single contact1 record after synchronization. |
[GoldMine] |
PBNotifyFreq= |
0/# |
Disable/Change the number of minutes between periodic updates of the Peg Board. |
[GoldMine] |
Recover=
or
Recovery= |
1/2 |
This command is placed in the GM.INI file when GoldMine encounters an error thatit determines requires indexing (Recovery=1) or rebuilding GoldMine removes this line once the file(s) have been reindexed or rebuilt properly and GoldMine detects no further errors. 1->Index database on next open.2->Pack & rebuild database on next open. |
[GoldMine] |
SetCommitRefreshSec= |
0 |
Disable BDE disk caching. Flushes data to disk immediately. |
[GoldMine] |
SigDir= |
Path to folder of signature bitmaps with trailing /. |
Allows digitized signatures in Word documents. |
[GoldMine] |
SQLQueryLimit= |
###(default=10,000) |
Specify the maximum number of records loaded in the SQL Query list view. |
[GoldMine] |
SybaseISO= |
0/1 |
For Sybase users, turn off/on ISOLATION 0. Is now off (0) by default. See 1202 notes. |
[GoldMine] |
SysDir= |
Path to GM system folder |
Location of system files such as exe & License.dbf. Usually X:\GoldMine\. |
[GoldMine] |
Transaction= |
0/1 |
Setting to disable/enable transaction processing by background processes. This setting is provided for Oracle 8.05 (or later) when MTXOCI.DLL is used as the Oracle Driver VENDER INIT DLL.?This setting can also eliminate sporadic MS-SQLError 0 messages. See 1202 notes. |
[GoldMine] |
UpdateLocalClock= |
0/1 |
(Don't)Synchronize all workstations-clocks with the MasterClock.Machine. |
[GoldMine] |
User= |
UserNameor blank |
Enters a default (or blank) username in the Username: box at the login screen whenGoldMine is opened. |
[GoldMine] |
UserINI= |
\\UNC path
Ex:UserINI=\\srv1\users\%user_id% |
Specifythe location of a user's .ini file, allowing the files to be stored in a secure read-only directory. GoldMine will automatically read the logged user and append it to the INI setting using the %USER_ID% variable. See 1202 notes. |
[GoldMine] |
UserLog= |
0/1 |
Track information about how long user has been logged in and the number of mouse clicks, etc. View statistics from File | Configure GoldMine | User's File |Properties | Time Clock. |
[NetUpdate] |
Exe= |
Path to GM4Setup.exe |
Tells GM where to look for new setup file if not default of X:\GoldMine\Setup\GoldMine\GM4Setup.exe |
[NetUpdate] |
LastDate= |
Date informat as 19990107160318 |
Set by GM.Date of last NetUpdate. Used to determine if a GM4Setup file is newer than running version. |
[NetUpdate] |
Prompt= |
0/1 |
(Don't)Prompt user to install newer version of software if found when-GM4Setup.exe is updated. |
[user_var] |
FieldName= |
Textstring |
Defines user variables for all users. The &user_var macro can then be used to merge the field values using an external application, such as Word. |
|
|
|
|
[ActvObj] |
AFStampSync= |
0/1 |
1 ->indicates that Mark Updated has been enabled under the Auto-Forward section of the Calendar tab of a user's preferences. |
[ActvObj] |
AlarmsLead= |
# |
Specifies the alarm lead time in minutes. |
[ActvObj] |
AlarmsOn= |
0/1 |
Turnsalarms off/on. |
[ActvObj] |
AutoForward= |
0/1...(repeats 6 times) |
Specifies which activities to Auto-Forward; specify either 0 to forward or 1 to avoid forwarding for each activity type. The order of activity type is: calls, messages, to dos, appointments, forecasted sales, and other actions. For example, to auto-forward all activities except appointments, use the following line: AutoForward=111011 |
[ActvObj] |
ConflictOn= |
0/1 |
Turns time conflict checking off/on. |
[ActvObj] |
Range= |
# |
This setting specifies the date range in the Activity List. 111 is all dates, 112 is today. |
[ActvObj] |
ShowCompany= |
0/1 |
Show the contact/company name in the Activity List in GoldMine 95. |
[ActvObj] |
ShowDetail= |
0/1 |
Instructs GoldMine to (not) show detail information in the Activity List. |
[ActvObj] |
ShowHistActvCode= |
0/1 |
(Don't)Display Activity Code in the History tab. |
[CalObj] |
EndTime= |
Time,example: 06:00pm |
Specifies time the user ends the workday. |
[CalObj] |
ShowActvs= |
# |
Specifies which activities will show in the calendar object. The syntax is the same asfor AutoForward= above. |
[CalObj] |
StartTime= |
Time,example: 09:00am |
Specifies time the user starts the workday. |
[CommSync] |
DelTempDir= |
0/1 |
Leave/Delete the transfer set in the directory after a successful sync. Default is delete. |
[CommSync] |
GSPath= |
Path |
Specifies the path to the GoldSync GSDATA directory. |
[CommSync] |
LastDialed= |
Phonenumber |
Stores the last number dialed. |
[CommSync] |
LastRecvPath= |
Path |
Specifies the last path a transfer set has been retrieved from. |
[CommSync] |
LastSendPath= |
Path |
Specifies the last path from where a transfer set has been sent |
[CommSync] |
WanTimeOut= |
#(default=20) |
Instructs GoldMine how long to wait (in seconds) for a response before timing out when synching with GoldSync over a WAN.. |
[FileMenu] |
Opt#= |
MText,CmdLine,DDECmd,Mnum
Ex:
Opt1=&Quote,C:\Quote.exe,,8
Opt2=&Letter,,Letter.doc,6 |
Adds options to GM menus. Replace # with number (order on menu). Place ampersand in front of hot-key in MText. MNum is one of:
1=Filemenu
2=Edit menu
3=Viewmenu, ...
9=Helpmenu
See Kbase for more info. |
[FindObject] |
FindUSAPhone= |
0/1 |
Disables/Enables searching by telephone numbers in the USA format when working with the Contact Listing. Default is enabled. |
[GMAlarm] |
CloseOnGMRun= |
0/1 |
1 ->GoldAlarm closes when GoldMine is active. 0 -> GoldAlarm remains in memory. |
[GMAlarm] |
IgnoreSnooze= |
# |
Sets the default number of minutes for which an active alarm is ignored. |
[GMAlarm] |
OKAlarmOnGMRun= |
0/1 |
1 ->Waits for you to click on the OK button before it runs GoldMine. |
[GMAlarm] |
OnByDefault= |
X...
Ex:OnByDefault=ACM |
Set alarmon when activity created. Replace X with one or more of:
A=Appointment
C=CallBack
D=To-do
E=Event
M=Message
O=Other
Q=Queued e-mail
S=Salespotential
T=Next action |
[GMAlarm] |
PlaySound= |
Path to.WAV file. |
Plays thespecified .WAV sound file when any alarm appears. |
[GMAlarm] |
RunOnGMClose= |
0/1 |
1 ->GoldAlarm starts when GoldMine is closed. |
[GMAlarm] |
ShowUpcoming= |
0/1 |
(Don't)Show upcoming alarms in GMALARM.EXE. |
[GoldMine] |
AlarmFreq= |
# |
Specifies the number of seconds GoldMine scans for alarms. |
[GoldMine] |
AllowSQLPgDn= |
0/1 |
Disallow/allowup/down paging For small SQL databases (fewer than 10,000 records) other than MS-SQL and Sybase. This functionality is provided by default for MS-SQL and Sybase. See 1222 notes. |
[GoldMine] |
BoldFont= |
0/1(default=0) |
Instructs GoldMine 95 to use a normal/bold font. |
[GoldMine] |
CompTimer= |
0/1 |
(Don't)Start timer when completing activities. |
[GoldMine] |
DupCheckExt= |
0/1 (default=1) |
Exclude/Include extension1 in match when checking phone1 for duplicates. |
[GoldMine] |
Epoch |
mm/dd/yy |
Specifies the cutoff date to default to the 21st century. Specifying 01/01/50 would make it so that any year entered before 50 would default to 20xx, after 50 would default to 19xx. |
[GoldMine] |
Followup= |
0/1(default=0) |
(Don't)Automatically check the schedule a follow up. |
[GoldMine] |
MacFile= |
UserName |
Allows other users to share macros of UserName specified. |
[GoldMine] |
MinFindObj= |
0/1(default=0) |
Expand/Shrink the Contact Listing window by default. |
[GoldMine] |
MSMailHistory= |
0/1 |
(Don't)Create a history record after sending an Internet e-mail message via Microsoft Outlook. |
[GoldMine] |
MSSQLMaxBrowseRecs= |
###(default is 2000) |
Option to increase the maximum records displayed in a browse window for MS-SQL 6.5/7.xand Sybase. See 1222 notes. |
[GoldMine] |
NewMenu= |
0/1 |
Disable/enable new menus |
[GoldMine] |
PhoneMsgEmail= |
0/1 |
Stores phone messages as scheduled call (0), default for version 4.0, or e-mail message (1), as was done in version 3.2. |
[GoldMine] |
PubFilter= |
# |
Show the username/public filters list when the filter window is opened. |
[GoldMine] |
PubForm= |
0/1 (default is 0) |
Show the username/public forms list in the merge forms window. |
[GoldMine] |
ROTabs= |
12 comma-separated values representing the names to display on the contact screen tabs |
Default is Summary, Fields, Notes, Contacts, Profiles, Referrals, Pending, History, Links, Groups, Tracks, Opptys, Projects |
[GoldMine] |
ROTitle= |
1/2 |
GoldMine to display the Company/Contact name in the title bar |
[GoldMine] |
SaveRemoteLic= |
Path tosave file with trailing \ |
Creates License.dbf file as undocked users are setup. See SP Tech Supp. |
[GoldMine] |
SplusLink= |
ACDT |
Activate the Schedule Plus link. |
[GoldMine] |
SQLQueryLimit= |
## |
Specify the maximum number of records loaded in the SQL Query list view. The default remains 10,000 records. The limitation is not a locking issue, but a memory limitation of loading so much data into the list view. |
[GoldMine] |
SyncActiveObj= |
0/1 |
(Don't)Sync Contact record display with highlighted item in Activity List display. |
[GoldMine] |
SyncGroupObj= |
|
(Don't)Sync Contact record display with highlighted item in Group List display |
[GoldMine] |
UpdatePegboard= |
0/1 |
Disable/Enable periodic updating of the Peg Board. |
[GoldMine] |
UserView= |
#(default=0) |
This setting specifies the default field view to show when the user logs in. |
[GoldMine] |
ZipValid= |
0/1 |
Trun ZipCode validation off/on. |
[GoldPager] |
MaxChars= |
# |
Stores the maximum character width setting for the pager. |
[GoldPager] |
PIN= |
# |
PIN (or Personal Identification Number) of the pager being paged. |
[GoldPager] |
ShowStatus= |
0/1 |
Allow/Disallow the pager status window to minimize. |
[GoldPager] |
Terminal= |
# |
Terminal number for the pager company. |
[GraphObj] |
Grid= |
0/1 |
Turns off/on the Snap-To grid in GoldMine 95's report layout mode. |
[HelpMenu] |
Opt#= |
&MenuText,Path\helpfile.hlp |
Adds anoption to the Help menu to open a custom help menu for GoldMine. |
[Info] |
Dpos= |
# |
Startingpoint of the InfoCenter window. |
[Info] |
Lsize= |
# |
Size ofthe InfoCenter window. |
[Info] |
ShowNew= |
0/1 |
(Don't)Show new InfoCenter items when logging in. |
[Internet] |
AllowDeleteAll= |
0/1 |
Disallow/Allow all e-mail to be deleted from the server. 1- (default setting)?will activate the Delete All Server Mail button or menu.0 - will deactivate the Delete All Server Mail button or menu. |
[Internet] |
AttachDir |
DirectoryPath |
DirectsGoldMine where to put attached files. Note: trailing "\" character is required. |
[Internet] |
AutoGetMail= |
0/1 |
(Don't)Check E-mail at every GETINTERVAL= interval. |
[Internet] |
DebugSocketPOP= |
0/1 |
Disable/Enable debugging POP sessions. This will cause GoldMine to start logging socket conversations with POP servers to files in the temp directory. Every POP session will be logged to a separate file. |
[Internet] |
DelServerMail= |
0/1 |
(Don't)Delete E-mail on the server upon retrieval. |
[Internet] |
ExtractEmbeddedHTML= |
0/1 |
Suppress/Enable extraction of Embedded HTML into an attachment that can be viewed using a Web browser by pressing the launch button. |
[Internet] |
FolderRefreshDelay |
0/99999999 |
Since 6.7 this option will control the Refresh of the inbox folder when your email is set to auto retrieve. GoldMine used to place new emails at the bottom of the list.
|
[Internet] |
GetInterval= |
# |
Determine show often GoldMine checks Internet connection for waiting E-mail, in minutes. |
[Internet] |
GetOldToNew= |
0/1 |
Sets the order of Internet messages downloaded to the E-mail Center. 0 ?(default) isnew to old. |
[Internet] |
Interactive= |
0/1 |
1 ->GoldMine E-mail retrieval session will be "live" and interactive. 0-> GoldMine will attempt to retrieve the E-mail on it's own. |
[Internet] |
KeepOldTransfers= |
0/1 |
Allows/Disallows transfer sets to be treated like any other e-mail attachment. The default is to always overwrite the existing transfer set. However, defining the setting to =1 offers users the option to overwrite or save file with another name. |
[Internet] |
LsizeC= |
# |
Stores the size & location of the Internet E-mail window. |
[Internet] |
LsizeR= |
# |
Stores the size & location of the Internet E-mail window. |
[Internet] |
MaxEmailSize= |
# |
LargestE-mail file GoldMine will retrieve, in Kbytes. |
[Internet] |
NewQuoteStyle= |
0/1 |
0->Quote e-mail in reply surrounded by >. Amd ?lt;<? 1-> Quote e-mail in replay by beginning each line with ">" |
[Internet] |
OnlyGMMail= |
0/1 |
1 ->only receive Internet E-mail created by GoldMine. 0 -> receive Internet E-mail created by anyone. |
[Internet] |
Organization= |
text |
Overridese-mail x-organization header section with text. Default text comes from Licensed to-registration screen. |
[Internet] |
POP3_PASS= |
password |
Password for the POP3 connection. |
[Internet] |
POP3_Server= |
servername |
Server name for the POP3 connection |
[Internet] |
POP3_USER= |
username |
Username for the POP3 connection. |
[Internet] |
POPIdle= |
## |
Changes the timeout value before closing the connection to the POP3 server. This is because POP3 servers only commit changes after the connection is closed. Note that the Dial up networking connection will not be closed, only the server connection will. The default is 10 minutes. |
[Internet] |
RetrieveOverWrite= |
2/4/6/7 |
Control show attachments are saved when a new file has the same name as an existing file. Options are: 2 - don't save the new file; 4 - assign a different name to the new file; 6 -overwrite the existing file; and 7 - bring up a dialog for the user to choose a file name (Option 7 isn't available for background mail retrieval, it will work just like Option 4). Name assignment is done by appending a number displayed in a set of () to the file name, so that "test.txt" will become "test(1).txt","test(2).txt" and so on. If there are more than 64 files with thesame name, a new random name will be generated. |
[Internet] |
Return_Address= |
Emailaddress |
User'sreturn E-mail address. |
[Internet] |
SendQueueFor= |
UserNamesseparated w/ semi-colon |
Allows a user to send other users queued e-mail to the internet server simultaneously when auto retrieving or sending queued mail. |
[Internet] |
SendQueueWhenAutoGet= |
0/1 |
(Don't)Send queued messages when using Auto retrieve. See 505 notes. |
[Internet] |
SigFile= |
Path totext file |
Appends the contents of a signature text file to a composed e-mail message. |
[Internet] |
SkipContains= |
? |
Specifies the value GoldMine uses to evaluate in SkipField=. |
[Internet] |
SkipExpr= |
? |
Specifies an expression for evaluating SkipField. |
[Internet] |
SkipField= |
? |
Specifies the GoldMine field to evaluate for the contents of SkipContains=. |
[Internet] |
SkipIfField= |
0/1 |
(Don't)Check the SkipField= for the value in SkipContains= and/or SkipExpr=. If set to 0, then GoldMine will not use those values in retrieving E-mail. Note that this is only active if GoldMine is automatically retrieving E-mail(Interactive=0 and AutoGetMail=1) |
[Internet] |
SkipLarge= |
0/1 |
(Don't)Skip retrieval of large E-mail files and attachments. |
[Internet] |
SkipNoAddress= |
0/1 |
(Don't)Skip retrieval of E-mail that doesn't have a matching return address in a GoldMine profile. |
[Internet] |
SkipOverWriteUI= |
0/1 |
Allow/Disallow prompt for duplicate e-mail attachment file names. Use RetrieveOverWrite= to determine how to name a new file with the same name as an existing file. |
[Internet] |
SocketDebug= |
2 |
Log e-mail sessions to a file in the user's temp dir. See 1202 notes. |
[Internet] |
SMTP_Server= |
servername |
Name forthe SMTP E-mail server. |
[Internet] |
TCPTimeOut= |
## |
Set thetimeout for GoldMine's Internet E-Mail. This setting will tell GoldMine how many seconds to wait (Timeout) after no response from POP3 server. |
[Internet] |
UseHeaderDate= |
0/1 |
Use date e-mail was retrieved(0)/sent(1). |
[Internet] |
UUEncodeScan= |
0/1 |
(Don't)Decode UU-encoded MIME attachments in incoming e-mail. |
[Internet] |
WarnAboutRTF= |
0/1 |
(Don't)Warn if the E-mail being retrieved contains Rich Text Format (RTF) codes. |
[Modem] |
AreaCode= |
# |
Specifies the local area code. |
[Modem] |
BaudRate= |
# |
Specifies the baud rate of the modem in GoldMine 2.5a. |
[Modem] |
CommPort= |
# |
Specifies which comm port the modem is using. |
[Modem] |
DelayTime= |
# |
Specifies the number of seconds to pause after dialing. |
[Modem] |
DDEDial= |
&Dial,appid,[ddecmd("%s")] |
Provide outbound auto dialing to a TAPI compliant device. |
[Modem] |
HangUp= |
Characterstring |
Specify the string to send to the modem to instruct it to hang up. |
[Modem] |
ModemInit= |
Modem initstring |
Specifies the modem initialization string. |
[Modem] |
ModemPrefix= |
Characterstring |
Instructs GoldMine to dial the numbers after the equal sign before dialing the rest ofthe phone number. |
[Modem] |
ModemSuffix= |
Characterstring |
Instructs GoldMine to dial the numbers after the equal sign after dialing the rest ofthe phone number. |
[Modem] |
PagerPort= |
# |
? |
[Modem] |
WaitForOkay= |
0/1 |
Disable/enable having to wait for an OK from the modem, allowing GoldMine to dial (such as speed dialing on smart phones). |
[NetUpdate] |
ProxyInfo= |
ftp=//your.ftp.proxy:proxy-port |
AllowsNetUpdate over ftp proxy. |
[NetUpdate] |
UseProxy= |
1 |
Allows NetUpdate over ftp proxy. |
[OpMgr] |
DefToFirstOp= |
0/1 |
(Don't)Automatically display the first Opportunity/Project associated with a contact in the Opportunity/Project field of a Scheduled Activity window. See 822 notes. |
[OpMgr] |
Opview= |
0/1 |
Opportunity default initial view is Opportunities/Projects. |
[RepLayout] |
Top Dock= |
Toolbarname |
Specifies which toolbars to display on the top of the screen. |
[Reports] |
LastRec= |
# |
Specifies the last report the user looked at. |
[Reports] |
RepTType= |
Letter |
Specifies the last report category selected. |
[RepPreview] |
Left Dock= |
Toolbarname |
Specifies which toolbars to display on the left side of the screen. |
[RepPreview] |
Preview= |
#,... |
Specifies which icons to display on the Preview icon bar. |
[RepPreview] |
RightDock= |
Toolbarname |
Specifies which toolbars to display on the right side of the screen. |
[RepPreview] |
Top Dock= |
Toolbarname |
Specifies which toolbar to display when in Report preview mode. |
[Session] |
Contact0= |
Contactacct & display info |
Last contact viewed. Set on exit . |
[Sync] |
CutoffDate= |
Date |
Specifies the synchronization cutoff date. GoldMine will update this line with the last date a successful sync was completed. |
[Sync] |
CutoffTime= |
Time |
Specifies the synchronization cutoff time. GoldMine will update this line with the last time a successful sync was completed. |
[Sync] |
Debug= |
0/1 |
Remove/AddSync Stamp Conversion option to the Sync Manager's local menu. This option will convert a date and time to a SyncStamp time (first 7 characters inRecID, and SyncStamp / LogStamp in Log files), and vice versa. NOTE: SyncSpy is also a utility for viewing when records in GoldMine were modified. Not supported by GoldMine Software Technical Support. |
[Sync] |
DefaultLapPath= |
Path |
Specifies the default path to the laptop's GoldMine directory when syncing with connected notebook. |
[Sync] |
DefaultXferPath= |
Path |
Specifies the default path to place a transfer set in. |
[Sync] |
GMT= |
# |
Local timezone difference from GMT. |
[Sync] |
RetrievePath= |
Path |
Sspecifies the default path from which to retrieve a transfer set. |
[Sync] |
TempLinksPath= |
Pathstring
Example: TempLinksPath=C:\GM\NEWLINKS |
Specify a different directory for the temp links path. When GoldMine cannot find thepath specified in the linked document it will place the document in the templinks path. Default is \GOLDMINE\TMPLINKS. |
[Sync] |
UseAltDrivesOnly= |
0/1 |
When GoldMine syncs linked documents, it will try to place the linked document inthe drive specified in the original path. To instruct GoldMine to ignore theoriginal drive and only search for the path using the drives specified inAltDrives= command, add UseAltDrivesOnly=1. To instruct GoldMine to attempt to place the document on the original before using the drives specified in AltDrives= command, add UseAltDrivesOnly=1. |
[Tool16] |
TopDock= |
# |
Determines which toolbars are displayed on the top menu bar. |
[Tool16] |
E-Mail= |
|
Determines which icons show up on the E-Mail toolbar |
[Tool16] |
Left Dock= |
|
Determines which toolbars appear docked to the left side of the screen. |
[Tool16] |
Misc= |
|
Determines which icons show up on the Misc toolbar |
[Tool16] |
Record= |
|
Determineswhich icons show up on the Record toolbar |
[Tool16] |
Schedule= |
|
Determines which icons show up on the Schedule toolbar |
[Tool16] |
Setup= |
|
Determines which icons show up on the Setup toolbar |
[Tool16] |
Standard= |
|
Determines which icons show up on the Standard toolbar |
[Tool16] |
Tools= |
|
Determines which icons show up on the Tools toolbar |
[Toolbar] |
ButtonText= |
0/1 |
Reduces/Enlarges toolbar icon buttons and displays the name on each button. |
[Toolbar] |
FlyBy= |
0/1 |
TurnsFly-By help off/on. Fly-By help appears in the right portion of the statusbar which is on the bottom of the GoldMine screen. |
[Toolbar] |
ToolbarSwitch= |
0/1 |
GoldMine95's toolbars cannot/can be docked or undocked from the edges of the screen. |
[Toolbar] |
UserConfig= |
0/1 |
Disallows/Allowsuser configuration of toolbars. |
[Toolbar] |
Quickhelp= |
0/1 |
Turns off/on Quick Help for the tool bars. Quick Help Displays a brief summary of what each icon button does |
[user_var] |
FieldName= |
Textstring
Example:Title=Salesman |
Defines user variables for a user. The &user_var macro can then be used to merge the field values using an external application, such as Word. |
[Warning] |
BrowseSort= |
0/1/2 |
Disables/Enables pop-up of the Sorting Columns Warning window displaying Don't show this message again checkbox. Set to 2 to disable column sorting with dBASE files. |
|
|
|
|
[GoldSync] |
AsyncRtrv= |
0/1 |
When usingInternet(Direct),-retrieve the remote's transfer set after the connection is done (0) or right away (1-default). See 1202 notes. |
[GoldSync] |
COBackupMins= |
##(default = 60) |
Back up the last cutoff time by n-minutes. |
[GoldSync] |
IPHandler= |
0/1 |
Thread exception error messages in GoldSync. See 1202 notes. |
|
|
|
|